4Push the memory card into the connector until the latches snap into place.
5Close the system board door.
Installing a flash memory or firmware card
The system board has two connections for an optional flash memory or firmware card . Only one of each may be
installed, but the connectors are interchangeab le.
CAUTION—POTENTIAL IN JURY: If you are installing inter nal options, memory cards, flash mem ory, or a
firmware card after setting up the printer, turn the printer off and unplug it from the wall outlet before continuing.
If you have other devices attached to the printer, then turn them off as well and unplug any cables going to the
printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1Open the system board door.
Additional printer setup
19