Setting collation options
30
Copying
Setting collation options
If you want your copies collated, you don’t need to do anything; this is the default setting.
For example, two copies of three pages will print page 1, page 2, page 3, page 1, page 2, page 3.
If you don’t want your copies collated, you can change the setting.
For example, two copies of three pages will print page 1, page 1, page 2, page 2, page 3, page 3.
To turn collation off:
1Place your original document in the automatic document feeder face-up, short-edge first.
2Adjust the paper guides.
3Touch Copy on the home screen.
4Use the numeric keypad to enter the number of copies you want.
5Touch Off if you do not want your copies collated.
6Touch Copy It.
Placing separator sheets between copies
1Place your original document in the automatic document feeder face-up, short-edge first.
2Adjust the paper guides.
3Touch Copy on the home screen.
4Touch Options.
5Touch Separator Sheets.
Note: Collation must be On for the separator sheets to be placed between copies. If Collation is Off, the
separator sheets are inserted after the job has been printed.
6Touch Copy It.
Setting paper saving options
1Place your original document in the automatic document feeder face-up, short-edge first.
2Adjust the paper guides.
3Touch Copy on the home screen.
4Make your duplex choice.
5Touch Options.
6Touch Paper Saver.
7Select the output you want.
For example, if you have four portrait-oriented original documents that you want copied to the same side of one
sheet, touch 4 on 1 Portrait.
8Touch Print Page Borders if you want a box drawn around each page on the copies.
9Touch Copy It.