Creating shortcuts
41
Faxing
Creating shortcuts
Instead of entering the entire phone number of a fax recipient on the control panel each time you want to send a fax, you
can create a permanent fax destination and assign a shortcut number. A single shortcut number or a multiple number
shortcut can be created. There are two methods for creating shortcut numbers: from a computer or from the MFP touch
screen.
From a computer
1Enter the IP address of the MFP in the URL field (address bar) of your Web browser. If you do not know the IP
address, see your administrator.
2Click Configuration (in the left frame of your browser window), and then click Manage Destinations (in the right
frame of your browser window).
Note: A password may be required. If you do not have an ID and password, get one from your system
support person.
3Click Fax Shortcut Setup.
4Enter a unique name for the shortcut, and specify the fax number.
To create a multiple number shortcut, enter the fax numbers for the group.
Note: Separate each fax number in the group with a semicolon (;).
5Assign a shortcut number.
If you enter a number that is already in use, you are prompted to select another number.
6Click Add.
7Go to the MFP, and load your original document in the automatic document feeder face-up, short-edge first.
8From the numeric keypad, press #, and then enter your shortcut number.
9Touch Fax It.
From the MFP
1Load the original document in the ADF face-up, short-edge first, and adjust the paper guides.
2Touch Fax on the home screen.
3Enter the recipient's fax number.
To create a group of recipients, touch Next number, and enter the next recipient’s fax number.
4Touch Save as Shortcut.
5Enter a unique name for the shortcut.
6Verify the shortcut name and number are correct, and then touch OK.
If the name or number is incorrect, touch Cancel, and reenter the information.
7Touch Fax It.