Installing or removing a memory card
87
Installing and removing options
Installing or removing a memory card

Installation

Note: MFP or printer memory cards designed for other Lexmark MFPs or printers may not work with this
MFP.
1Remove the system board access cover. (See Accessing the MFP system board.)
Warning: MFP memory cards are easily damaged by static electricity. Touch something metal such as the MFP
frame before you touch a memory card.
2Push open the latches on both ends of the memory card connector.
3Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4Align the notches on the bottom of the card with the notches on the connector.
5Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6Make sure each latch fits over the notch on the end of the card.
Memory connector
Memory card