![](/images/new-backgrounds/1196284/196284185x1.webp)
Chapter9 | Print Quality Problems |
Problem |
| Cause & Solution |
|
|
|
Print is too light or | ● | Make sure the Print Quality setting is set to |
blurred |
| Normal. See Print Quality on page |
|
| information. |
| ● | Check to see if the print cartridge ink is low or |
|
| empty. |
| ● | If you are printing on an uneven print surface, |
|
| change the paper type setting. |
| ● | If there is a recommended print size for the paper, |
|
| load the proper paper. |
| ● | Clean the printheads. |
Characters print askew | ● | Align the print cartridge. |
| ● | Adjust the Print Quality to Normal. |
|
|
|
Characters print with | ● | Check to see if the print cartridge ink is low or |
White lines |
| empty. |
| ● | Remove and reinstall one of the print cartridges. |
|
| See 'Replacing Print Cartridges' on page |
|
| more information. |
| ● | Clean the printheads. |
|
|
|
Incorrect character print | ● | This printer is not selected as the default. Check |
|
| the default printer. |
| ● | Make sure you are using the correct cable. Use |
|
| an IEEE |
|
| cable. |
Chapter9
Troubleshooting |