
Owner's Manual
Dri-Eaz EvolutionTM LGR Dehumidfier
READ AND SAVE THESE INSTRUCTIONS
WARNING
FIRE AND ELECTRIC SHOCK HAZARD
Unit must be electrically grounded.
•Insert 3- prong plug on power cord directly into matching grounded receptacle.
•Do not use adaptor Keep wiring and motor dry.
•Do not operate in standing water •Do not operate in rain or snow.
•If electrical components become wet, allow them to dry before using.
Read and understand manual before use.
Use and Operation
INTRODUCTION
The Evolution LGR dehumidifier reduces humidity in enclosed structural environments by removing water vapor from the air. With proper use, the Evolution LGR can help dry wet materials like carpet, carpet pad, floors, walls, building contents and more. Using dehumidifiers may also prevent secondary damage caused by high humidity.
For best results, we recommend you use the Evolution LGR dehumidifer with
HOW THE EVOLUTION LGR WORKS
IMPORTANT: Before moving the unit, make sure there’s no water in the pump. See how to use the PURGE function under “How to Use the Touchpad Controller” on page 3.
SETTING UP A DRYING AREA
Use in an enclosed space
You should operate dehumidifiers in an enclosed area, as this creates a drying chamber. Close all doors, windows or areas that open to the outside to maximize the unit’s water removal effeciency. Also, keep traffic though the drying chamber to a minimum.
How to position the Evolution LGR dehumidifier
•Place your Evolution LGR dehumidifier in the middle of a room away from walls
and contents
•Keep it away from anything that could prevent airflow into and out of the unit.
Use a 115V, | Do not use with an | |
adaptor | ||
grounded connection | ||
|
Illustration of proper dehumidifier placement
2