its highest certified power level in all tested
frequency bands. Although SAR is determined at the
highest certified power level, the actual SAR level of
the phone while operating can be well below the
maximum value. Because the phone is designed to
operate at multiple power levels to use only the
power required to reach the network, in general, the
closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model. The highest SAR value
for this model phone when tested for use at the ear is
1.34 W/kg and when worn on the body, as described
in this user’s manual, is 1.41 W/kg. (Body-worn
measurements differ amongphone models,
depending upon available accessories and FCC
requirements.) While there may be differences
between SAR levels of various phones and at various
positions, they all meet the government requirement
for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC
ID BEJC1300I.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.wow-com.com
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Safety Guidelines
WELCOME
88