
Installation en 21 | |
|
|
SD slot
You can insert an SD card into the slot on the side of the camera module to enable recordings to be saved locally. SD cards are the ideal solution for shorter storage times and temporary recordings, for example alarm recordings or local buffering in the event of network interruptions.
NOTICE!
The release letter for the current firmware version includes a list of compatible SD cards.
Playing back recordings is also possible using a different
CAUTION!
If the card is formatted, all existing data is deleted from the card.
You should therefore check whether the SD card contains any data that needs to be backed up before it is inserted.
1. Carefully slide the SD card into the slot as far as it will go, until it locks into place.
2. To remove the SD card, push carefully in the direction of insertion until the mechanical catch releases and then remove the card.
4.4Power on/power off
Power supply
The
CAUTION!
Use only SELV power supply units with UL approval.
Where necessary, use suitable equipment to ensure that the power supply is free from interference such as voltage surges, spikes or voltage drops.
Do not connect the
1.Plug the terminal block with the PSU cable connected to it into the upper
2.Connect the power supply unit to the mains. The
Provided the network connection has been correctly made, the green LINK LED also lights up. The lit orange ACTIVITY LED signals that data packets are being transmitted via the network.
Bosch Sicherheitssysteme GmbH | Installation and Operating Manual | DOC V4.5 2010.09 |