76 en Configuration using a Web browser | |
|
|
NOTICE!
Duplication of data places a heavy demand on the camera and can lead to impairment of the image quality under certain circumstances.
Port
Assign a different port to each data stream if there are simultaneous data streams at the same multicast address.
Enter the port address of the required stream here.
Streaming
Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled stream is indicated by a check mark. The device streams multicast data even if there is no active connection.
Streaming is typically not required for standard multicast operation.
Multicast packet TTL
You can enter a value to specify how long the multicast data packets are active on the network. This value must be greater than one if multicast is to be run via a router.
5.37 | Advanced Mode: FTP Posting |
You can save individual JPEG images on an FTP server at specific intervals. You can then retrieve these images at a later date to reconstruct alarm events if required. Furthermore, you can export selected recordings manually from the RECORDINGS page or activate the automatic export of alarm recordings on the Recording Profiles settings page.
File name
You can select how file names will be created for the individual images that are transmitted.
–Overwrite
The same file name is always used and any existing file will be overwritten with the current file.
DOC V4.5 2010.09 | Installation and Operating Manual | Bosch Sicherheitssysteme GmbH |
