Bosch Appliances VOT-320 manual Digital I/O, Triggering relay, System Log / Event Log

86 en Operation VOT-320

Digital I/O

The alarm icons Input 1 and Input 2 are for information purposes and indicate the status of an alarm input: When an alarm is triggered, the corresponding icon lights up blue. The camera's configuration determines whether the alarm is displayed, as well as additional details (see Section 5.14 Advanced Mode: LIVEPAGE Functions, page 38).

Triggering relay

You can switch connected units using the relays in the VOT-320 (for example lights or door openers).

To activate this, click the icon for the corresponding relay next to the video image. The icon will be red when the relay is activated.

System Log / Event Log

The System Log field contains information about the operating status of the VOT-320 and the connection. You can save these messages automatically in a file (see Section 5.14 Advanced Mode: LIVEPAGE Functions, page 38).

Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see Section 5.14 Advanced Mode: LIVEPAGE Functions, page 38).

1.If you want to delete the entries, click the delete icon in the top right-hand corner of the relevant field.

2.If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open.

DOC V4.5 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH