5.9 | Advanced Mode: Identification |
Camera ID
Each
Camera name
The camera name makes it easier to identify the remote camera location, in the event of an alarm for example. It will be displayed in the video screen if configured to do so (see Section Camera name stamping, page 36). The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the Bosch Video Client or Bosch Video Management System programs.
Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.
You can use the second line for entering additional characters; these can be selected from a table.
1.Click the icon next to the second line. A new window with the character map is opened.
2.Click the required character. The character is inserted into the Result field.
3.In the character map, click the << and >> icons to move between the different pages of the table, or select a page from the list field.
4.Click the < icon to the right of the Result field to delete the last character, or click the X icon to delete all characters.
5.Now click the OK button to apply the selected characters to the second line of the Camera 1 parameters. The window will close.
Initiator extension
You can attach your own text to the initiator name of the
Bosch Sicherheitssysteme GmbH | Installation and Operating Manual | DOC V4.5 2010.09 |
