VOT-320

Configuration using a Web browser en 25

 

 

Establishing the connection

Before you can operate the VOT-320 within your network, it must have a valid IP address for your network and a compatible subnet mask.

The following default address is preset at the factory: 192.168.0.1

1.Start the Web browser.

2.Enter the IP address of the VOT-320 as the URL.

3.During initial installation, confirm the security questions that appear. The connection is established and after a short time you will see the LIVEPAGE with the video image.

Maximum number of connections

If you do not connect, the camera may have reached its maximum number of connections. Depending on the unit and network configuration, each VOT-320 can have up to 25 Web browser connections or up to 50 connections via Bosch Video Client or Bosch Video Management System.

Bosch Sicherheitssysteme GmbH

Installation and Operating Manual

DOC V4.5 2010.09

Page 25
Image 25
Bosch Appliances VOT-320 manual Establishing the connection, Maximum number of connections