50 en Configuration using a Web browser

VOT-320

 

 

Export to FTP

Select this parameter if you want all alarm recordings to be exported to an FTP server automatically. Make sure to have inserted all relevant data for FTP posting (see Section 5.37 Advanced Mode: FTP Posting, page 76).

Alarm input / Motion/Audio alarm / Video loss alarm

Here you can select the alarm sensor that is to trigger a recording.

NOTICE!

The alarm inputs are configured and activated on the Alarm Inputs page (see Section 5.31 Advanced Mode: Alarm Inputs, page 66).

The numbering of the checkboxes for the alarm inputs corresponds to the labeling of the alarm inputs on the VOT-320.

The motion alarm is configured and activated on the VCA page (see Section 5.25 Advanced Mode: VCA, page 56 onwards).

Virtual alarm

Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example.

NOTICE!

For more information, please see the Alarm Task Script Language document and the RCP+ documentation. These documents can be found on the product CD supplied.

5.21

Advanced Mode: Retention Time

You can specify the retention times for recordings. If the available memory capacity of a medium has been used, older recordings are only overwritten if the retention time entered here has expired.

NOTICE!

Make sure that the retention time corresponds with the available memory capacity. A rule of thumb for the memory requirement is as follows: 1 GB per hour retention time with 4CIF for complete frame rate and high image quality.

Recording 1 / Recording 2

Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2.

DOC V4.5 2010.09

Installation and Operating Manual

Bosch Sicherheitssysteme GmbH

Page 50
Image 50
Bosch Appliances VOT-320 Advanced Mode Retention Time, Export to FTP, Alarm input / Motion/Audio alarm / Video loss alarm