70 en Configuration using a Web browser | |
|
|
CAUTION!
If you change the IP address, subnet mask or gateway address, the
Automatic IP assignment
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the
Certain applications (Bosch Video Client, Bosch Video Management System) use the IP address for the unique assignment of the camera. If you use these applications, the DHCP server must support the fixed assignment between IP address and MAC address, and must be appropriately set up so that, once an IP address is assigned, it is retained each time the system is rebooted.
IP address
Enter the desired IP address for the
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
Gateway address
If you want the camera to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).
DNS server address
The camera can use a DNS server to resolve a mail or FTP server address specified as a name. Enter the IP address of the DNS server here.
Video transmission
If the camera is operated behind a firewall, TCP (HTTP port) should be selected as the transfer protocol. For use in a local network, select UDP.
CAUTION!
Multicast operation is only possible with the UDP protocol. The TCP protocol does not support multicast connections.
The MTU value in UDP mode is 1,514 bytes.
HTTP browser port
Select a different HTTP browser port from the list if required. The default HTTP port is 80. If you want to allow only secure connections via HTTPS, you must deactivate the HTTP port. In this case, select Off.
DOC V4.5 2010.09 | Installation and Operating Manual | Bosch Sicherheitssysteme GmbH |
