Installation
External Equipment Connections
- This manual mainly explains the features for the 15LA6R.
Antenna Connection
- For optimum picture quality, adjust antenna direction.
Connecting to an Inside Antenna Setup
-Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.)
|
| Turn clockwise to tighten. |
|
|
| PC INPUT | ANT IN |
|
| Bronze Wire | +75 Ω |
| 75Ω Round Cable |
|
|
|
| Antenna |
|
| 300Ω Flat Wire | Converter |
|
Apartment Buildings | Wall Connection Jack | Antenna Jack | |
|
| ||
-If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, connect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
-If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outdoor Antenna Setup
- This type of antenna is commonly used in single family dwellings.
| VHF Antenna |
|
|
|
|
|
| Turn clockwise to tighten. |
|
|
|
| PC INPUT ANT IN | |
|
|
|
| +75 Ω |
| UHF |
|
|
|
| Antenna | 75Ω Round Cable | Bronze Wire |
|
|
|
|
| |
|
| 300Ω Flat Wire |
|
|
| Single Family Home |
| Antenna | Antenna Jack |
|
|
| ||
|
|
| Converter |
|
- | In poor signal areas, to get better picture quality, install a |
|
| |
| signal amplifier to the antenna as shown to the right. |
|
|
|
- | If signal needs to be split for two TVs, use an antenna |
|
|
|
| signal splitter for connection. | VHF | PC INPUT | ANT IN |
| UHF | +75 Ω | ||
Signal
Amplifier
11
