●aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria 20A, aria 20, aria 20W
15
System Features
Button Procedures Range
Voice Announcement
Record your greeting,
Lift handset or press MON button.
Press DND/FWDbutton.
Dial 7 # Record yo ur gr e e tin g
Press Hold/Save
NB: Call Forward to DVU is automatically enabled after recording your greeting.
Delete your greeting,
Lift handset or press MON button.
Press DND/FWDbutton.
Dial 7 *.
Activate Call Forward to DVU,
Lift handset or press MONbutton.
Press DND/FWDbutton.
Dial 7 .
Go on-hook.
Deactivate Call Forward to DVU,
Lift handset or press MONbutton.
Press DND/FWDbutton.
Dial #.
Go on-hook.
To listen to the recorded message,
Press the flashing CALLBKbutton.
The recorded message is heard with the time and date.
Pressing HOLD/SAVEbutton, the current message is saved
and the next message is heard.
Pressing CALLBKbutton, the recorded message is heard from
the first.
Pressing CONFbutton, the current message is deleted.
•The operation of 2/8 BTN keyset is the same as aria186/100
/34e systems. (Refer to p.36)
※The max. user recording time is about 250sec. (Default: 20sec: it can be set with
installer programming)
CO Message Wait (CLI Message Wait)
Button Procedures Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is displayed on the LCD of the
station. If the DISA/DID external party hangs up the call beforeanswered, the CLI will be stored in the CO message wait queue
in the called party.
To retrieve CLI Message,
Press CALLBKbutton.
The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
Press CONFbutton.
To make a callback,
Press HOLD/SAVEbutton.
The stored number is dialed as speed dialing.
To see the next/previous CLI message,
Press VOLUMEbutton.
To delete all CLI messages,(Not available in aria 20/16/20W)
Press SPEED button twice.
If DVU message is stored with CLI message, the CLI message willnot be deleted by
pressing SPEED button.
DISA (Direct Inward System Access)
Dial the CO access code after hearing dial tone or voice guide from DVU.
Or, dial the CO access code after dialing the programmed authorization code (when
needed) for outgoing call.
Button Procedures
Outside caller can access a CO line which is programmed as DISA line. Range