●aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria 20A, aria 20, aria 20W
18
Attendant Operation
To Set Current Time 1 Hour Early/Late
Button Procedure
To set the current time 1 hour early,
Press TRANS/PGMbutton.
Dial *1.
To set the current time 1 hour late,
Press TRANS/PGMbutton.
Dial * 2.
Button Procedure
To store system speed numbers,
Press TRANS/PGMbutton.
Dial SPEEDbutton.
Dial speed number bin.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
A group of speed dial numbers can be stored within the system for access by allowed stations. These numbers provide
speedy access to often used outgoing CO dialing numbers.
20/16/20W : 21~99
System Speed Dial
Or, speed dial by line number:
Press TRANS/PGMbutton.
Dial SPEEDbutton.
Dial speed number bin.
Press desired outside line button.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
To use system speed numbers,
Press SPEEDbutton.
Dial speed number bin.
20/16/20W : 21~99
Attendant Intrusion
Button Procedure
To activate attendant intrusion
Press CO button you wish to converse. (If intrusion is allowed by Admin program, then 3 way conversation
is set up. If intrusion is not allowed, busy tone will be heard.)
Requires Installer Programming Settings.
Attendant may intrude into any station which is in conversation with a CO line.
Day/Night Mode Service
To activate/deactivate Day/Night/On-demand mode manually,
Press DND/FWDbutton at attendant station.
Then, DND/FWD button is flashing. (The system is in On-demand mode.)
If pressing the DNDbutton one more, then the system is in Night service mode.
On-demand mode is not activated automatically. (Auto Ring Mode –see below)
Button Procedures
The attendant station can be placed into night service mode allowing ring assignments and answering privileges to station
not having the privileges in the day mode. In aria20/16/20W,Day/Night mode change is available by pressing DND button at
attendant station.
To activate/deactivate Day/Night/Auto Ring mode manually,
Pressing DND/FWDbutton, the ring mode is changed to Night →Auto Ring →Day mode in sequence.
Button Procedures
The system can be placed in Day/Night/Auto Ring mode operation manually by pressing [DND/FWD] button at attendant
station. In Auto ring mode, the ring mode will follow the WeeklyTime Table in Installer Programming. Available for ver 4.0(aria
16) and 3.0(aria20W), all aria 20
Auto Ring Mode Service
To activate Auto ring mode with Attendant PGM mode,
The Weekly Time Table should be entered by Admin Programming