LG Electronics 20W, 20A manual System, Placing a CO Call on Hold, Group Call Pick-up, Conference

●aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W

Flash

May disconnect outside line and re-seize dial tone if programmed . It can be used to send a recall to line, when the system is connected with a PBX or Enhanced Feature Analogue Line.

Button	Procedures	Range
	While connected to an outside line, press FLASH button.

Placing a CO Call on Hold

Button Procedures Range

While on a CO call

Press HOLD/SAVE button.

-Hold Preference for system hold or exclusive hold is set at Installer programming

To retrieve the call,

Lift handset and press flashing outside line button. OR dial 8 # and the CO line number

Group Call Pick-up

Button	Procedures	Range
	You should be in the same pick-up group as ringing phone.
	You hear an unattended phone ringing.
	Lift handset or press MON button.
	Dial 6 6

Conference

Button Procedures Range

To establish a conference,

Call desired party. (internal or outside)

Press CONF button. (CONF button is lighting and the called party is put on exclusive hold.)

Call the next party.

Press CONF button twice. (once if adding additional parties) Conference is established.

To exit a conference (unsupervised),

Press CONF button in the supervisor station and hang up.

Other parties are still connected.

Re-entering a conference,

Lift handset or press MON button. Press CONF button.

To drop an outside party, (not available in aria 16/20W) (You should be active in the conference.)

Press outside line of party you wish to drop. Hang up or press MON button.

To terminate the conference,

Hang up or, press CONF button if unsupervised.

On LKD-2N/S, 8D/S,

Conference feature can be accomplished by programming a flexible key as CONF button (TRANS + 91).

NB:

At most 3 parties can be active in a conference.

System

Programming Your Name into Display

You can program your name and people using display phones will see your name instead of your station number.

Button	Procedures	Range
	Press TRANS/PGM button.	Available by Software:
	Press SPEED button and dial 0 0.
	Press SPEED button.	16: Above V4.0
	Enter your name. (up to 7 letters using the code in “Storing Dial by name.)	20W: Above V3.0)
	Press HOLD/SAVE button.

Features

13