LG Electronics 26LX1D, 26LX2D Power Command2a, Volume Mute Command2e, Screen Mute Command2d

Reference

01. Power (Command2:a)

GTo control Power On/Off of the TV.

Transmission

[k][a][ ][Set ID][ ][Data][Cr]

Data 0 : Power Off 1 : Power On

Acknowledgement

[a][ ][Set ID][ ][OK][Data][x]

*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.

05. Volume Mute (Command2:e)

GTo control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission

[k][e][ ][Set ID][ ][Data][Cr]

Data 0 : Volume mute off (Volume on)

1: Volume mute on (Volume off)

2: Volume mute on, Caption on

Acknowledgement

[e][ ][Set ID][ ][OK][Data][x]

02. Input Select (Command2:b) (Main Picture Input)

GTo select input source for the TV.

Transmission

[k][b][	][Set ID][	][Data][Cr]
Data	0: DTV	5: Component 2
	1: Analog	6: RGB-DTV
	2: Video 1	7: RGB-PC
	3: Video 2	8: HDMI/DVI
	4: Component 1
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]

03. Aspect Ratio (Command2:c) (Main picture format) G To adjust the screen format.

You can also adjust the screen format using the RATIO button on remote control or in the Option menu.

Transmission

[k][c][	][Set ID][ ][Data][Cr]
Data	1: Normal screen (4:3)	6: Auto (Set by program)
	2: Wide screen (16:9)	10: Cinema Zoom (1)
	3: Horizon
	4: Zoom 1
	5: Zoom 2	1F: Cinema Zoom (16)

Acknowledgement

[c][ ][Set ID][ ][OK][Data][x]

04. Screen Mute (Command2:d)

GTo select screen mute on/off.

Transmission

[k][d][ ][Set ID][ ][Data][Cr]

Data 0: Screen mute off (Picture on) 1: Screen mute on (Picture off)

Acknowledgement

[d][ ][Set ID][ ][OK][Data][x]

06. Volume Control (Command2:f)

GTo adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission

[k][f][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

•Refer to ‘Real data mapping’ as shown below.

Acknowledgement

[f][ ][Set ID][ ][OK][Data][x]

07. Contrast (Command2:g)

GTo adjust screen contrast.

You can also adjust contrast in the Video menu.

Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

•Refer to ‘Real data mapping’ as shown below.

Acknowledgement

[g][ ][Set ID][ ][OK][Data][x]

08. Brightness (Command2:h)

GTo adjust screen brightness.

You can also adjust brightness in the Video menu.

Transmission

[k][h][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

•Refer to ‘Real data mapping’ as shown below.

Acknowledgement

[h][ ][Set ID][ ][OK][Data][x]

*Real data mapping 0 : Step 0

A : Step 10 (SET ID 10)

F: Step 15 (SET ID 15)

10 : Step 16 (SET ID 16)

64 : Step 100

* Tint: R 50 ~ G 50

104