LG Electronics 26LX1D, 26LX2D VCR Setup, When connecting with an antenna, 32, 37, 42 inch TV Back

Installation

VCR Setup

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

-Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.

When connecting with an antenna

32, 37, 42 inch TV Back

R AUDIO L (MONO) VIDEO

S-VIDEO	MONITOR
	OUT
	CABLE
	VIDEO1

2

ANT IN
ANT OUT S-VIDEO	OUT
OUTPUT	(R) AUDIO (L) VIDEO
SWITCH
3 4	IN

26 inch TV Back

CableCARD

HDMI

IEEE 1394

CABLE

2

ANT IN
ANT OUT S-VIDEO	OUT
OUTPUT	(R) AUDIO (L) VIDEO
SWITCH
3 4	IN

COMPONENT1

R L

ANTENNA AUDIO INPUT VIDEO INPUT

VCR

1

	COMPONENT1
VIDEO INPUT		ANTENNA
	R L	AUDIO INPUT

1

VCR

1Connect the RF antenna out socket of the VCR to the Antenna socket on the set.

2Connect the antenna cable to the RF antenna in socket of the VCR.

3Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

4Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

When connecting with a RCA cable

32, 37, 42 inch TV Back

R AUDIO L (MONO) VIDEO

MONITOR

S-VIDEO

OUT

VIDEO1

	COMPONENT1
R	L
AUDIO INPUT		VIDEO INPUT
		1

ANT IN

ANT OUT S-VIDEO	OUT
OUTPUT	(R) AUDIO (L)	VIDEO
3 4	IN	VCR
SWITCH

26 inch TV Back

				HDMI
				IEEE
DIGITAL AUDIO				1394
OUTPUT	(OPTICAL)
	S-VIDEO
				COMPONENT1
DVI INPUT	R AUDIO L (MONO) VIDEO	VIDEO1	VIDEO INPUT
COMPONENT1 INPUT				R L	AUDIO INPUT
				1

ANT IN

ANT OUT S-VIDEO	OUT	VCR
OUTPUT		(R) AUDIO (L) VIDEO
SWITCH
3 4	IN

1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3Select Video1 input source using the TV/VIDEO button on the remote control. - If connected to IN2 (or VIDEO2), select Video2 input source.

• If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.

22