LG Electronics 32LC2DU owner manual Hdstb Setup

Installation

HDSTB Setup

-This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

When connecting with a HDMI cable

SERVICE

RGB IN

(PC)

AUDIO IN	REMOTE
(RGB/DVI)	CONTROL IN

HDMI IN

2

1(DVI)

RS-232C IN

(CONTROL & SERVICE)

1

Digital Set-top Box

HDMI-DTV OUTPUT

1Connect the HDMI output of the digital set-top box to the HDMI IN 1(DVI) or 2 jack on the set.

2Select HDMI1/DVI or HDMI2 input source with using the INPUT button on the remote control.

3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

•TV can receive the video and audio signal simultaneously using a HDMI cable.

•If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will be automatically set to 1280x720p.

•If the digital set-top box does not support Auto HDMI, you need to set the output resolution appro- priately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.

When connecting with a Component cable

Digital Set-top Box

B R (R) AUDIO (L)

	1	2
			C
	V	AUDIO	OMPONENT IN
			AV
			OUT
OPTICAL			AV
DIGITAL AUDIO	S-VIDEO VIDEO	(MONO)	IN
		AUDIO	1
OUT

1Connect the video outputs (Y, PB, PR) of the digi- tal set-top box to the COMPONENT IN VIDEO jacks on the set.

2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set.

3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4Select Component 1 input source with using the INPUT button on the remote control.

-If connected to COMPONENT IN 2, select Component 2 input source.

Signal	Component1/2	HDMI1/DVI, HDMI2
480i	Yes	No
480p/720p/1080i	Yes	Yes

23