LG Electronics 32LC2DU owner manual Programming the Remote, Programming a code into a remote mode

Reference

Programming the Remote

GThe remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers.

Note that the remote control may not control all models of other brands.

Programming a code into a remote mode

TV INPUT					INPUT
		POWER
TV		DVD			VCR
		MODE
AUDIO		CABLE			STB
B	-	MENU		BR	IGHT +
RIGHT
		ENTER
EXIT	TIMER		RATIO		INFO
VOL MUTE			FAV		CH

1 2 3

4 5 6

7 8 9

0 FLASHBK

1	Test your remote control.
	To find out whether your remote control can operate the component
	without programming, turn on the component such as a VCR and press
	the corresponding MODE button (VCR) on the remote control, while
	illuminating on the selected component. Test the POWER button to see
	if the component responds properly. If not, the remote requires pro-
	gramming to operate the device.
2	Turn on the component to be programmed, then press the correspond-
	ing MODE button on the remote control.
3	Press the MENU and MUTE buttons simultaneously for 2 seconds, the
	button selected component lights on the remote control. If you don't
	press any button for 20 seconds, the button selected component will turn
	off on the remote control. At a moment, you have to repeat from step 2.
4	Enter a code number using the number buttons on the remote. When
	pressing the button, the light is blinked at a time. Programming code
	numbers for the corresponding component can be found on the follow-
	ing pages. Again, if the code is correct, the device will turn off.
5	Press the MENU button to store the code. After blinking twice, this code
	is stored.
6	Test the remote control functions to see if the component responds
	properly. If not, repeat from step 2.

EZ PIC EZ SOUND SAP CC

ADJUST

61