Installation of Unit
Connecting
the
Cable
to
Indoor
Unit
•The inside and outside connecting cable can be connected after opening the side inlet grille.
1. Open the
2. Open the panel (A) with driver ( 
) (Fig. 2)
3. Connect the connecting pipe (Fig. 3)
4. Connect the cables (LG doesn't supply) to the terminal block in the front panel. (Fig. 3)
5. Secure the panel (A) to the original position with the screw ( 
).
6.Insert the plastic tube (bushing) in small hole in order to prevent the connecting wires from being cut by sharp edge of the hole.(Fig. 4), America, Canada only.
7.Close the
Fig. 1 | Fig. 2 |
"A"
Fig. 3
"B" |
Wiring Details(B) |
|
|
|
|
| ||||
1 Cooling Model | (America, Canada Only) | ||||||||
1 | 2 | 3 | 4 | 5 | 3(L1) 4(L2) | 5 | 6 | 7 | |
| To Outdoor Unit |
| To Outdoor Unit | ||||||
2 Heat Pump Model |
|
|
|
| |||||
1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
| To Outdoor Unit |
|
|
|
|
| |||
3 Heat Pump + Heater Model |
|
|
| ||||||
1 | 2 | 3 | 4 | 5 | 1 | 2 |
|
|
|
To Outdoor Unit
Fig. 4
Plastic tube (Bushing)
14Floor Standing type Air Conditioner
