Installation
-HDMITM, the HDMI logo and
-This set can receive the
-This set supports HDCP
-When you connect to HDMI/DVI Source devices (DVD Player, STB or PC) that support AUTO HDMI/DVI Plug & Play, this sets the HDMI/DVI source devices automatically. (640 x 480p) (or 42PX4R series : 1280 x 720p).
Afer reading HDMI/DVI source devices, using Display Data Channel (DDC) Protocol, Extended Display Identification Data (EDID) stored in the set is used.
If HDMI/DVI Source devices do not support AUTO HDMI/DVI, the resolution is set manually.
-To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to (640 x 480p) (or 42PX4R series : 1280 x 720p).
-To get the best picture quality, adjust the PC graphics card to (640 x 480) (or 42PX4R series : 1024 x 768), 60Hz.
-When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How to connect>)
How to connect
1.When Source Devices (DVD Player or Set Top Box) support HDMI. - If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable .(not supplied
with the product).
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in (640 x 480p) (or 42PX4R series : 1280 x 720p). But if not, resolution divert Manually Setting for reference Manual of Source Devices.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to (640 x 480p) (or 42PX4R series
: 1280 x 720p).
-Because HDMI sends Digital Video and Audio with one cable, there is no need for Audio Cable when using HDMI Cable.
2.When Source Devices (DVD Player or Set Top Box) supports DVI. - If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not sup-
plied with the product).
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in (640 x 480p) (or 42PX4R series : 1280 x 720p). But if not, resolution divert Manually Setting for reference Manual of Source Devices.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to (640 x 480p) (or 42PX4R series
:1280 x 720p).
-In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector, RGB/DVI Audio Input of the set connect to Audio Cable (not supplied with the prod- uct). And then you can listen to normal Audio.
3.When PC supports DVI.
-If PC has a DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with the product).
-To get the best picture quality, adjust the PC graphics card to (640 x 480) (or 42PX4R series : 1024 x 768), 60Hz.
-Use the the set’s HDMI/DVI (VIDEO) for video connections, depending on your PC connector.
-If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one of either RGB Input or HDMI/DVI Input to display the PC on the set.
-If the graphics card on the PC does output analog RGB and DVI simultaneously, the set to either RGB Input or HDMI/DVI Input;
(the other mode is set to Plug and Play automatically by the set.)
-Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.
-In this case, Audio use other cable. When PC (or sound card of PC) have Analog Audio Output Connector, RGB/DVI Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen to normal Audio.
Reference
Cable sample (not supplied with the product)
HDMI Cable | Analog Audio Cable |
| (RCA type) |
HDMI to DVI Cable | Analog Audio Cable | |
(Stereo to RCA type) | ||
|
How to use
1.Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the set.
2.Turn on the display by pressing the POWER button on the set and HDMI/DVI Source Devices remote control.
3.Select HDMI/DVI Input source in Main Input option of PIP/DW menu.
4.Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card can not changed, change the PC graphics card or con- sult the manufacturer of the PC graphics card.
Notes:
-Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
-Avoid keeping a fixed image on the set screen for a long peri- od of time. The fixed image may become permanently imprint- ed on the screen. Use the Orbiter screen saver when possible.
-When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to Screen. As shown the lower picture, press the MENU button to adjust the screen Position of the set and contact an PC graphics card service center.
-When Source Devices connected HDMI/DVI Input output the set Resolution(480p, 720p, 1080i), the set Display fit EIA/CEA-
-In case of HDMI/DVI Source Devices are not connected, Cable or poor cable connection, "No Signal" OSD display in HDMI/DVI Input. And In case of Video Resolution not sup- ported when output is HDMI/DVI Source Devices, "No Signal" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact your service center.
ENGLISH
Owner’s Manual 11
