ASSEMBLING AND PREPARING 7
Storage Method for Panel Protection
Correct Method | Incorrect Method |
Panel
Panel
If the product needs to be set upright, hold both |
| |
sides of the product, and tilt backward carefully | If the product is tilted onto the bezel, the bottom of | |
for. Do not let the panel not to touch the floor. | ||
the panel may be damaged. | ||
|
PanelCushion
Panel
When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.
Panel
If the product is tilted onto the edge of the panel, the panel may be damaged.
If there is not a cushion available, ensure the floor is clean and then lay the product down carefully with the panel facing either upward or downward. At this time, be careful for objects not to fall on the panel.
ENGLISH
