MAKING CONNECTIONS 51

Daisy Chain Monitors

Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box.

To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products.

RGB Cable

15-pin D-Sub Signal Cable

(Max 3m)

ENGLISH

Monitor 1

Monitor 2

Monitor 3

Monitor 4

DVI Cable

DVI Cable (Max 3m)

(not included)

Monitor 1

Monitor 2

Monitor 3

Monitor 4

NOTE

yyWhen multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid signal degradation and cable loss.

yyFor DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended resolution) if the signal is stable and there is no cable loss.If you want to connect more than this number of monitors, we recommended that you use a distributor.

yyWhen multiple monitors are connected via DVI, the HDCP-encrypted content can be normally played only on the monitor that receives the first signal.(The DVI Out port does not support HDCP.)

yyIf the signal cable between the product and your PC is too long, make sure to use the DVI (RGB) booster or DVI (RGB) optical cable.

yyIf input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via the DVI Out port.

Page 51
Image 51
LG Electronics 38WR50MS owner manual Daisy Chain Monitors, RGB Cable, DVI Cable