LG Electronics 22 2L LS S4 4D Appendix, Downloaded From TV-Manual.com Manuals, Transmission

APPENDIX

16. ISM Method (Plasma TV only) (Command: j p )

GTo control the ISM method. You can also adjust ISM Method in OPTION menu.

Transmission

[j][p][ ][Set ID][ ][Data][Cr]

Data 01: Inversion

02:Orbiter

04:White wash

08:Normal

Ack

[p][ ][Set ID][ ][OK/NG][Data][x]

17. Power Saving (Plasma TV only) (Command: j q)

GTo reduce the power consumption of the TV. You can also adjust Low Power in OPTION menu.

Transmission

[j][q][ ][Set ID][ ][Data][Cr]

Data Min :00 ~ Max :04 (*transmit by hexadecimal code) Ack

[q][ ][Set ID][ ][OK/NG][Data][x]

	18. Auto Configure (Command: j u)
	G To adjust picture position and minimize image shaking
APPENDIX	automatically. It works only in RGB (PC) mode.
	Transmission
	[j][u][ ][Set ID][ ][Data][Cr]
	Data 01: To set
	Ack
	[u][ ][Set ID][ ][OK/NG][Data][x]

19. Equalize (Command : j v)

G To adjust equalize.

Transmission

[j][v][ ][Set ID][					][Data][Cr]
	MSB										LSB
Data :
	0			0	0	0		0	0	0	0
		Frequency							Step
Frequency :			0				120Hz
			1				200Hz
			2				500Hz
			3				1.2kHz
			4				3kHz
			5				7.5kHz

612kHz

Step (Frequency data):

Refer to ‘Real data mapping 3’. See page 115.

Ack

[v][ ][Set ID][ ][OK/NG][Data][x]

* Euqalize command expression

7	6	5	4	3	2	1	0	Frequency
0	0	0						120Hz
0	0	1						200Hz
0	1	0						500Hz
0	1	1						1.2KHz
1	0	0						3KHz
1	0	1						7.5KHz
1	1	0						12KHz
					Step			OSD
7	6	5	4	3	2	1	0	Value
			0	0	0	0	0	-24
			..	..	..	.. ..		..
			0	1	1	1	1	0
			..	..	..	.. ..		..
			1	1	1	1	1	24

* Real data mapping 1

00 : Step 0

A : Step 10 (Set ID 10)

F: Step 15 (Set ID 15)

10 : Step 16 (Set ID 16)

64:Step 100 6E : Step 110

73 : Step 115

74 : Step 116

C7: Step 199

FE : Step 254

FF : Step 255

*Real data mapping 2

00 :-40

01 : -39

02 :-38

28 :0

4E : +38

4F : +39

50 : +40

Ex) If you wish to set frequency 500Hz and -20 value on menu OSD, refer to ‘Real data mapping 3’ and then find Step value for -20.

010 (500Hz) 00011(Step 3) => 01000011 => 43 (Hexadecimal) : [j][v][ ][Set ID][ ][43][Cr]

*3 bits of Frequency and 5 bits of Step makes 8 bits (1 byte). Change 8 bits to Hexadecimal code.

114

Downloaded From TV-Manual.com Manuals