External Control Device Setup
17. Color Temperature (Command:u)
GTo adjust color temperature.
You can also adjust color temperature in the Video menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
18. ISM Method (Command:p)
GTo avoid having a fixed image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data | 1: Inversion | 4: White Wash | |
| 2: Orbiter | 8: Normal | |
Acknowledgement |
|
| |
|
|
|
|
[p][ | ][Set ID][ ][OK][Data][x] |
|
|
|
|
|
|
19. Orbiter Time Setting (Command:r)
GTo adjust orbiter operation time term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE
•Refer to ‘Real data mapping’. See page 36.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
20. Orbiter Pixel Setting (Command:s)
GTo adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 9
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
21. Channel Tuning (Command: m a)
GTo tune channel to following physical/major/minor number
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3] [ ][Data4][ ][Data5][Cr]
Data 0: Physical channel number (Transmit by Hexadecimal code)
*NTSC air: 02 ~ 45
NTSC cable: 01, 0E ~ 7D
ATSC air: 01 ~ 45
ATSC cable: 01 ~ 87
Data 1, Data 2: Major channel number
*Data 1: High byte
Data 2: Low byte
Data 3, Data 4: Minor channel number
*Data 3: High byte
Data 4: Low byte
Data 5: Attribute
*(0: NTSC Air, 1:NTSC Cable, 2: ATSC air,
3:ATSC cable_STD, 4: ATSC cable_HRC,
5:ATSC cable_IRC)
Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][Data5][x] [a][ ][Set ID][ ][NG][Data0][x]
22. Channel Add/Del (Command: m b)
GTo add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete
1: Channel Add
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x]
23. Key (Command: m c)
GTo send IR remote key code
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 40.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
*It’s impossible to command the IR Code 0x08 and 0xC4 with
38 Plasma TV
