IP Environment Setup (Cont.)
Pro:Centric Setup
The Pro:Centric Menu options enable you to configure Pro:Centric server settings in the TV. With Pro:Centric selected, use the Up/Down arrow keys to navigate between fields.
Note: Options that are initially grayed out/inaccessible in the Pro:Centric Menu are dependent upon other settings in the display. For example, if “IP” is selected in the Media Type field, the Server IP and Port Number fields become accessible.
Note: For those fields that permit direct entry of numerical values (for example, Port Number, Data Channel, etc.), once you key in the maximum number of digits allowed in the highlighted field, the next available field will be highlighted.
| IP Environment |
|
|
| Move | Prev. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Mode | ► |
|
| Off | ► |
| |
| Network Setup |
| Media Type |
|
|
| RF |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Server IP | 0 |
| 0 |
| 0 | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Port Number |
|
|
| 0 |
|
| |
| Offset Setup |
| Wake On Lan |
|
|
| Off |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Data Channel |
|
|
| 0 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Pro:Centric |
| Wake On RF |
|
|
| Off |
|
| |
|
|
|
|
|
|
| AM |
|
| |
|
| Wake On Time | 12 | : | 00 |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.To enable/disable Pro:Centric application operation on a TV, use the Left/Right arrow keys on the Installer Remote to select the appropriate
Note: If the mode has already been set in the Installer Menu (Installer Menu item 098 PRO:CENTRIC), the specified mode will be reflected in this field. If you change the mode in this menu, Installer Menu item 098 will now reflect the value you entered here.
2.In the Media Type field, use the Left/Right arrow keys to select IP or RF, as required.
Note: Setting the Media Type to “IP” automatically sets the Data Channel field to “253.” You cannot alter this setting (unless you revert to RF media). It is not possible to direct enter “253” in the Data Channel field.
3.(IP media only) Complete the Server IP and Port Number fields for TV
Either key in or use the Left/Right arrow keys to select the appropriate values in each field. Note that the port number (five digits maximum) must match exactly the port number that has been set in the Pro:Centric RF/IP Configuration display in the Admin Client (refer to the Pro:Centric™ Server Admin Client User Guide for further information).
4.In the Wake On LAN field, use the Left/Right arrow keys to select On or Off, as required. The Wake On LAN feature enables the TV to receive software updates via the LAN while the TV is in standby mode.
5.(RF media only) In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number of the data channel for Pro:Centric or
The TV may take several minutes to load EPG data after AC power is initially applied.
Note: If the data channel has already been set in the Installer Menu (Installer Menu item 119 DATA CHANNEL), the specified channel will appear in this field. If you change the data channel in this menu, Installer Menu item 119 will now show the value you entered here.
6.(RF media only) In the Wake On RF field, use the Left/Right arrow keys to select On or Off, as required. The Wake On RF feature enables the TV to receive software updates via RF while the TV is in standby mode. If you set Wake On RF to “On,” specify the appropriate Wake On time in the Wake On Time field. Note that the Wake On time is based on a
7.Once all fields are completed as required, press MENU to return to TV viewing, or press RETURN to return to the previous menu level.
46 |
