Reference: TV Zone Restrictions
The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Configuration Utility enables you to assign Zone restrictions to channels that may be deemed unsuitable for certain locations, for example, a hotel lobby. In the FTG Channel Map Editor, a Zone # (for example, “1”) must be designated for each channel that is to be restricted.
On location, set the Zone # for all the TVs in a select area, or “Zone” (for example, the lobby) so that the TVs can omit channels that have been restricted in the FTG Channel Map. However, note that while a chan- nel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. TV Zone 0 is the default TV Zone #. When the TV Zone is 0, the TV will ignore any restriction that may be placed on channels in the FTG Channel Map.
See the FTG Channel Map Editor overview on page 43. Also, see the
Use the following procedure to specify a Zone designation for a TV.
1.Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the OPTION menu option. Then, press ENTER.
2.Use the Up/Down arrows to select Zone, and then press
ENTER.
3.In the Zone
4.Press MENU to return to TV viewing, or press RETURN to return to the previous menu level.
OPTION | Move | Enter |
|
Menu Language | : English |
|
|
Audio Language | : English |
|
|
Caption | : Off |
|
|
Set ID | : 1 |
|
|
Demo Mode | : Off |
|
|
Zone | : 0 |
|
|
| ► | 1 | ► |
|
| Close |
|
57 |
