LG Electronics 26LK330, 50PW340 OSD Select Command k l, Remote Control Lock Mode Command k m

				EXTERNAL CONTROL DEVICE SETUP 105
12. OSD Select (Command: k l)			Data3
To select OSD (On Screen Display) on/off.				00: Right to Left
				01: Left to Right
	Transmission [k][l][ ][Set ID][ ][Data][Cr]
			Data4
Data 00: OSD off		Data 01: OSD on
				3D Depth: Min : 00 ~ Max : 14
	Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]			(*transmit by Hexadecimal code)
13. Remote Control Lock Mode (Command: k m)			( Plasma	)
To lock the remote control and the front panel			*If data1 is 00(3D On), data4 has no meaning.
controls on the set.			*If data1 is 01(3D Off) or 02(3D to 2D), data2, data3
			and data4 have no meaning.
	Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off		Data 01: Lock on	*If data1 is 03(2D to 3D), data2 and data3 have no
			meaning.
	Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
			Data 1		Data 2	Data 3	Data 4
If you’re not using the remote control and front panel
			00		o	o	x
controls on the Monitor set, use this mode. When
			01		x	x	x
main power is on/off, remote control lock is released.
			02		x	x	x
If Key Lock is on in the standby mode, TV will not
turn on by POWER button of remote control and on			03		x	x	o
the TV.			x : Don’t care
14. Treble (Command: k r)			( LCD	)
To adjust treble.
			*If data1 is 00(3D On), data4 has no meaning.
You can also adjust treble in the AUDIO menu.
			*If data1 is 01(3D Off) or 02(3D to 2D), data2, data3
	Transmission [k][r][ ][Set ID][ ][Data][Cr]
			and data4 have no meaning.
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
			*If data1 is 03(2D to 3D), data2 has no meaning.
code)								ENGLISH
			02		x	x	x
*Refer to “Real data mapping”.			Data 1		Data 2	Data 3	Data 4
			00		o	o	x
	Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
			01		x	x	x
15. Bass (Command: k s)
			03		x	o	o
To adjust bass.
You can also adjust bass in the AUDIO menu.			x : Don’t care
	Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

16.Balance (Command: k t) To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

17.3D (Command: x t) (For 3D TV) To change 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][Cr]

Data1
00: 3D On	01: 3D Off
02: 3D to 2D	03: 2D to 3D
Data2
00: Top and Bottom	01: Side by Side
02: Check Board	03: Frame Sequential

Acknowledgement [t][ ][OK][Data01][Data02] [Data03][Data04][x][t][ ][NG][Data01][x]

18.Color Temperature (Command: x u) To adjust color temperature.

You can also adjust color temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

19.Extended 3D (Command: x v) (For 3D TV) To change 3D option for TV.

Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr] Data1: 3D option

00: 3D Picture Correction

01:3D Depth (2D to 3D Only)

02:3D Viewpoint

03:3D Picture Size

04:3D Picture Balance

05:3D Optimization