LG Electronics 42LD655H Turn On the TLL-1100A, Clone Mode, Use the Left/Right arrow to, Setup

COMMERCIAL MODE SETUP

TLL-1100A CLONING CONNECTIONS/LEARNING SETUP

Connections for the TLL-1100A Clone Programmer to Learn the TV Master TV Setup

On Master TV

Set up all Master TV features in the menus and do a Channel Search. Add Channel and Aux labels etc. See previous page. Insert an MPI cable into the TV’s MPI port.

On TLL-1100A

1.	Turn On the TLL-1100A.
2.	Use the Mode button to select
	Clone Mode.
3.	Use the Left/Right arrow to
	select the CBank (1 - 8) to store
	the master setup in.
4.	Plug the other end of the MPI

CLONE SELECTION MENU Selected Bank: CBank X Saved

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

CLONE CLOCK = 00:00

TV CLOCK = 00:00

THE CLONE IS VERSION V2.2.2 -To change menu items, Press channel keys or digits.

-To execute item, Press ENTER.

M.P.I. Learning Setup

Antenna

(or CATV)

TV Link

Loader-Demo

TLL1100A

Ready

MODEMENU

ENTER

RECEIVESEND

TLL1100A

cable into the MPI port on the

bottom of the TLL.

5. With the Installer remote control,

select item 1 on TLL menu.

6. Press Enter, to transfer the

Master setup into CBankX on the

TLL. The TLL will copy the master

setup.

7. When learning is done, discon-

nect MPI cable from Master TV.

8. Reconnect TV power cord. Power

the TV On and the master setup

should be resident on the TV.

M.P.I. Teaching Setup

Antenna

(or CATV)

TV Link

Loader-Demo

TLL1100A

Ready

MODEMENU

ENTER

RECEIVESEND

TLL1100A

CLONE SELECTION MENU Selected Bank: CBank X Saved

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

CLONE CLOCK = 00:00

TV CLOCK = 00:00

THE CLONE IS VERSION V2.2.2 -To change menu items, Press channel keys or digits.

-To execute item, Press ENTER.

COMMERCIAL MODE SETUP

On Target TV

1.Connect MPI cable from the TLL to the MPI port on the Target TV. Assure that the correct CBank(X) is selected on TLL..

2.With the Installer remote control select item 2, to Teach the target TV the master TV setup.

3.Press Enter to begin teaching.

4.When Teaching is done, discon- nect MPI cable and power the TV Off. Unplug TV power cord.

5.Reconnect TV power cord. Power the TV On and the master setup should be resident on the TV.

Warning

G Do not use the TLL-1100A while any PPV card is installed in the TV or the clone programmer device will be damaged.

!NOTE

G It is assumed that the TV is connected to a signal source, the TV source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the TLL Cloner main menu is displayed on the TV screen, see above.

G If an analog channel is not available, tune the TV to an Aux source like AV-1 for cloning purposes.

102