LG Electronics AWD-12312(7)RD, AWD-14312(7)RD No Water Supply, Detergent does not Flow

NO WATER SUPPLY

	Is water supply shut-off?￿￿￿		￿￿￿￿￿
	Is the tap opened?
	When you press both Rinse button and Spin button
	simultaneously, is the water level frequency below
	240?	￿￿	￿￿￿
	Is the inlet valve filter clogged￿￿with impurity?
	Is resistance between each terminal of INLET		￿￿
	VALVE ASSEMBLY is 2~8￿￿￿kΩ?
	Check the voltage of the inlet valve connector		￿￿
	220-240V~.
	(Refer to 7-2 QC TEST MODE)
	DETERGENT DOES NOT FLOW IN
	Is water supplied?	￿￿￿	￿￿
￿￿￿￿￿￿￿￿￿￿￿￿￿	Are replaceptacles correctly connected to the		￿￿
	terminals of the INLET VALVE￿￿￿ASSEMBLY?
	Is detergent put in the correct compartment of		￿￿
	the drawer?	￿￿￿
	Is the detergent hardened?		￿￿￿

Open the tap.

Check the AIR CHAMBER and the tube clogged with impurity.

Clean the filter.

Replace the INLET VALVE ASSEMBLY.

Replace the MAIN PWB

ASSEMBLY

Refer to

「NO WATER SUPPLY」

Check the wiring on the dispenser.

Put the detergent in the correct position

PRE+MAIN

MAIN WASH

: Detergent

Clean the drawer.

20