The Battery

NOTE It is important to fully charge the battery before initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

To install the battery, insert the battery into the opening on the back of the phone. Put the battery cover on the battery and push it slightly upwards.

Removing the Battery

Turn the power off. Push down slightly on the three ridges located at the top of the phone. Pull the battery cover downward and remove it. Then remove the battery by pressing the upper area of it.

Charging the Battery

To use the charger provided with your phone:

Getting Started with Your Phone

Warning! Use only the charger provided with the phone. Using any charger other than the one included with the AX4270 may damage your phone or battery.

1.Plug the end of the adapter into the phone’s charger jack and the other end into an electrical outlet.

2.The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying Low Battery. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Fully Charged

 

Fully Discharged

AX4270 13

Page 14
Image 14
LG Electronics AX4270 manual Getting Started with Your Phone, Battery Charge Level