
| USING THE MONITOR SET 11 | |
CAUTION | Self Image Setting Function | |
Press the power button on the front panel to turn | ||
| ||
yyConnect the signal | the power on. When monitor power is turned on, | |
the "Self Image Setting" Function is executed | ||
input cable and tighten | automatically. (Only supported in Analog Mode) | |
it by turning the screws |
| |
clockwise. |
| |
yyDo not press the screen with your finger for |
| |
a long time as this may result in temporary |
| |
distortion on the screen. |
| |
yyAvoid displaying a fixed image on the |
| |
screen for a long period of time to prevent |
| |
image burn. Use a screensaver if possible. |
|
ENGLISH
NOTE
yyWhen you want to use two PC in our Monitor, please connect the signal
yyIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal.
yySome red, green, or blue spots may appear on the screen. This is normal.
NOTE
yy"Self Image Setting" Function.
This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)
yy‘AUTO’ Function.
When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)