ASSEMBLING AND PREPARING 7
Mounting on a table | WARNING |
1Lift and tilt the Monitor set into its upright position on a table.
Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm 
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
ENGLISH
Do not touch or press the screen when adjusting the angle of the monitor.
2Connect the Power Cord to a wall outlet.
NOTE
Tilt from +15 to
- 5
15
3Press 
(Power) button on the front switch
panel to turn the power on.
Front 
Rear
CAUTION
Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
