CYCLE OPTION buttons
Your dryer features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
1Turn on the dryer and turn the cycle selector knob to select the desired cycle.
2Use the cycle settings buttons to adjust the settings for that cycle.
3Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display.
4Press the START/PAUSE button to start the cycle. The dryer will start automatically.
WRINKLE CARE
Selecting this option will tumble the load periodically for up to 3 hours after
the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to immediately remove items from the dryer.
DAMP DRY BEEP
With this option, the dryer will beep when the load is approximately 80%
dry. This allows you to remove
RACK DRY
Use RACK DRY with items, such as wool sweaters, silk, and lingerie, that
should dry flat. RACK DRY can also be used with items that should not be tumbled dry, such as gym shoes or stuffed animals.
NOTE: NEVER use the rack with a tumble dry cycle.
To Install the Drying Rack
1With the dryer door open, slide the rack into the dryer drum.
2Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer.
NOTE: Be sure to remove the drying rack after using the RACK DRY cycle.
31 
