Power Connection (Continued)
Automotive
Adapter
This DVD player and its automotive adapter are designed for use in vehicles that have 12 volt, negative ground electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the DC power system cannot be used.
Cigarette lighter socket
Follow steps 1 to 2 to connect. | 1 |
When disconnecting, reverse the order. |
|
2
Caution
•To prevent electrical shock and possible damage to your DVD player or vehicle, always unplug the automotive adapter from the cigarette lighter socket before you remove the plug from your DVD player.
•A 3 amp. 250V fuse for protection is installed in the automotive adapter.
•While the engine is being started, disconnect the automotive adapter from the car’s cigarette lighter socket.
•Do not operate your DVD player when the car battery is discharged. Peak current from the car generator may cause the DC fuse to blow.
•If the vehicle’s supply voltage drops below approximately 10 volts, your DVD player may not work properly.
•Do not leave your DVD player in a place where the temperature exceeds 70°C (158°F), or the
Examples include:
-Inside a car with the windows closed and in direct sunshine.
-Near a heating appliance.
Automotive adapter
•This automotive adapter operates on DC 12V.
•MODEL NO. : DPDC1
•Manufactured by WANLIDA Digital Technology Co., Ltd.
•Contact an electrical parts distributor for assistance in select- ing a suitable automotive adapter.
12
