Adding detergent

❿Detergent dosage

Detergent should be used according to the instruction of the detergent manufacture.

If too much detergent is used, too many suds can occur and this will decrease the washing result or cause heavy load to the motor.

It is recommended that you use powdered detergent for best results.

If you wish to use liquid detergent follow guidelines provided by the detergent manufacturer.

You can pour liquid detergent directly into the main detergent drawer if you are starting the cycle immediately.

Please do not use liquid detergent if you are using 'Time Delay ' as the liquid may harden, or if you have selected 'Pre Wash‘.

If too many suds occur, please reduce the detergent amount.

Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid oversudsing.

WARNING

Do not let the detergent harden.

Doing so may lead to blockages, poor rinse performance or bad odor.

NOTE

Full load : according to manufacturer’s recommendation.

Part load : 3/4 of the normal amount.

Minimum load : 1/2 of full load.

Detergent is flushed from the dispenser at the beginning of the cycle.

❿Adding water softener

• A water softener, such as Anti-limescale (e.g. Calgon) can be used to cut down on the use of detergent in extremely hard water areas. Dispense according to the amount specified on the packaging. First add detergent and then the water softener.

• Use the quantity of detergent as for soft water.

❿Using tablet

1.Open the door and put tablets into the drum.

2.Load the laundry into the drum and close the door.

30

Page 30
Image 30
LG Electronics F1480RD ❿Detergent dosage, ❿Adding water softener, ❿Using tablet, Do not let the detergent harden