How to use washer
■Tub Clean
Tub Clean is a special cycle to clean the inside of the washing machine.
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.
1. Remove any clothing or items from the washer and close the door.
2. Open the dispenser drawer and add Anti limescale(e.g. Calgon) to the main wash compartment.
3. Close the dispenser drawer slowly.
4. Power On and then press and hold Spin
and Temp. button for 3 seconds. then “
” will be displayed on the LED display.
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to allow the washer door opening, flexible gasket and door glass to dry.
NOTE
•Do not add any detergent to the detergent compartments.
•Excessive suds may generate and leak from the washer.
CAUTION
•If there is a child, be careful not to leave the door open for too long.
■Door Lock & Detecting
B
A
•
“Door Lock” - For safety reasons, the door will lock while machine is in use and the
“Door Lock” icon will light up. You can safely open the door after the “Door Lock” icon turns off.
•
While "Detecting" is shown on the display the washing machine rotates slowly
and detects how much laundry is loaded in the drum.
It will take a short time.
26
