Configuration Options (Cont.)
(Continued from previous page)
2.With the Main Menu on display, type the number corresponding to the System Info option, and press Enter.
The system will display a System Information banner that contains important information about the HCS6600, including the unit serial num- ber, hardware ID (firmware version), and software version. LG suggests that you record this infor- mation for future reference. If you find it neces- sary to call customer service or engineering sup- port, please have this information available.
Reset the HCS6600
Use the following procedure if you wish to reset the HCS6600.
1.Connect your PC to the HCS6600 Service Port, and access the Main Menu as described previously.
2.With the Main Menu on display, type the number corresponding to the Reset option, and press Enter.
The system resets the HCS6600. During the reset process, several pages of status and diag- nostic messages may be displayed. After reset, the HCS6600 resumes normal operation, and the system displays the System Information ban- ner and Main Menu.
Update HCS6600 Firmware
Use the following procedure if you wish to update HCS6600 firmware.
Note: If you are not sure of the current firmware version, LG recommends that you view and record the System Information (see procedure above) before you initiate the firmware update.
1.Connect your PC to the HCS6600 Service Port, and access the Main Menu as described previously.
2.With the Main Menu on display, type the number corresponding to the Update Firmware option, and press Enter.
3.The system will request a configuration (.cfg) file. Transfer the new configuration file using Xmodem protocol.
For example, in HyperTerminal, select Transfer and then Send File.... In the Send File window, enter or select the appropriate configuration file in the Filename field, and select Xmodem in the Protocol field.
4.Upon receipt of the configuration file, the system will request a package (.pkg) file. Transfer the package file using Xmodem protocol.
This process may take several minutes; please be patient. When the process is com- plete, the system will report success or failure of the firmware installation.
5.Repeat steps 1 to 4 of this procedure for each HCS6600 card whose firmware you wish to update.
6.Upon successful installation(s), power cycle the system: Unplug the power cord of the card frame for 15 seconds; then plug it in again.
15 |
