PORTASTUDIO 414 MKII Brief Guide
Recorder Controls
Connections on the Rear Panel
Meters : The meters numbered
ZERO RETURN : When this switch is on and you press REW, the tape fast winds to the counter zero point. The associated LED blinks when the tape is rewinding, and glows solid when the 000 point is reached.
DBX switch : Normally, leave this switch at ON. When you use track 4 to record and play back MIDI sync tones or time code, set to SYNC then the dbx is on for tracks
Tape counter : Shows the distance the tape has moved from a zero reference point.
Counter reset button : Press to change the counter to "000".
PITCH CONTROL : Increases or decreases the speed of the transport in Play and also in Record, over a 10% range (approx.).
SUB IN L and R : Provide a direct route to the MASTER fader. An outboard mixer may be connected here. The SUB IN R jack is also used to record sync tones on track 4.
SYNC OUT : Sync tones you'll record on track 4 are sent out of this jack to the TASCAM
LINE OUT L and R : Normally, connect these jacks to the Left and Right inputs of your mixdown deck.
MON OUT L and R : These are connected to an amplifier powering the control room speakers.
EFFECT 1 SEND : For sending post chan- nel fader signals to effects devices. The returns are plugged into the STEREO INPUTS.
EFFECT 2 SEND/TAPE CUE OUT : The signal available at this jack comes either from post channel fader for connection to an additional effects device or from the tape for connection to a studio speaker system, as selected by means of the EFFECT 2/TAPE CUE switch.
On the front
PHONES : This carries the same mix as the MON OUT jacks, as selected by the MONITOR switches.
REMOTE PUNCH IN/OUT : Connect to this jack the optional
RC- 30P footswitch.
Transport keys :
Principally these work the same as on any cassette recorder.
RECORD FUNCTION
✂
13 |
| 14 |
