Notes on HDMI Out connection

If your TV does not accept your resolution setting, abnormal picture appears on the screen. (“TV do not support” will appears in screen). Please read owner’s manual for TV, and then set the resolution that yourTV can accept.

Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.

When you connect a HDMI or DVI compatible device make sure of the following :

-Try switching off the HDMI/ DVI device and this unit. Next, switch on the HDMI/ DVI device and leave it for around 30 seconds, then switch on this unit.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720X480i(576i), 720X480p(576p), 1280X720p, 1920X1080i or 1920X1080p video input.

-The 1080p, 720p and 480p(576p) resolutions are the progressive scan applied resolution.

Not all HDCP-compatible DVI devices will work with this unit.

-The picture will not be displayed properly with non-HDCP device.

Speaker Setting up

Attaching the speakers to the DVD

receiver

You will have received six speaker cables.

Each one is colour - coded by a band near each end and connects one of the six speakers to the DVD receiver.

Connect the wires to the DVD receiver.

Match each wire’s coloured band to the same coloured connection terminal on the rear of the DVD receiver. To connect the cable to the DVD receiver, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.

Connect the black end of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus).

Enjoying audio from an external source

and selecting the function

You can enjoy audio from an external source through your unit.AndYou can select the function. Press FUNCTION repeatedly to select the desired input source and the function (DVD/CD, USB, AUX, AUX OPT, PORTABLE, FM,AM).

Connect the wires to the speakers.

Connect the other end of each wire to the correct speaker according to the colour coding

Main Unit

SPEAKER

POSITION

REAR R

Grey

Behind you and to your right.

FRONT R

Red

In front of you, to the right of the screen.

 

 

 

CENTER

Green

Above screen, directly in front of you.

 

 

 

SUB WOOFER

Orange

This can be placed in any front position.

REAR L

Blue

Behind you and to your left.

 

 

 

FRONT L

White

In front of you, to the left of the screen.

 

 

 

To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad.

Digital Audio in connection

Connect the unit’s OPTICAL IN jack to the optical out to jack on your TV (or Digital Device etc.)

Be careful of the following

Be careful to make sure children do not put their hands or any objects into the *speaker duct.

*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).Use the rear speaker at least 30 CM away from either TV screen or PC monitor.

9

Page 9
Image 9
LG Electronics HT924SF owner manual Connect the wires to the DVD receiver, Connect the wires to the speakers