LG Electronics IQ, MMBB0360104(1.0) manual Charging Mode

Getting Started

Getting Started

Charging Mode

1.When you charge your phone, the phone’s LED next to the earpiece of your phone turns to red and displays a charging animation.

2.When the phone is fully charged, the LED turns to green. The ‘Battery full’ notification appears on the screen.

3.If you press and hold the Power key for approx. 2 seconds in charging mode, the phone is turned on.

4.When the battery is completely discharged, the red LED blinks and the phone cannot be turned on. As soon as the charged power reaches 1% (after a few minutes), the LED stops blinking and the charging animation is displayed. Then you can turn the phone on.

CAUTION!

•When you charge a fully discharged battery, it may take over a minute for the display to respond. This is not a malfunction but completely normal.

(If using a USB cable, it may take over 10 minutes.)

•Do not force the connector as this may damage the phone and/or the charger.

•If you use the charger out of your own country, use an attachment plug adaptor for the proper configuration.

•Do not remove your battery or the SIM card while charging.

•There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the manufacturer's instructions.

•Recommend the travel adapter for charging.

WARNING

•Unplug the charger from the mains and the phone during lightning storms to avoid electric shock or fire.

•Make sure that no sharp-edged items such as animal teeth or nails come into contact with the battery. This may cause a fire.

24