LG Electronics L1972H manual Using the Computer, Connect Dsub Cable Mac

Connecting the Display

Using the Computer

1. Make sure to turn off the computer and product. Connect the cable as below sketch map

	form 1 to 2 .
A	Connect DVI Cable	NOTE
B	Connect Dsub Cable (PC)
		This is a simplified representation of the rear
C Connect Dsub Cable (Mac)		view.
		This rear view represents a general model;

your display may differ from the view as shown.

Power Cord 2 1 Signal Cable

Varies according to model.

Wall-outlet type

DVI-D(This feature is not available in all countries.)

PC

PC

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

2. Press button on the side switch panel to turn the power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically. (Only Analog Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

A6