Chapter 2: System Setup

2-21

The default (typical) line-in level for the selected device type is displayed. You can increase or decrease the level, but if the level is set too high, you may expe- rience clipping at higher volume levels.

To connect using Sonos Controller

From the Music menu, select Line-In Sources and press OK.

To play music from this source, highlight it and press OK.

To change the name of the component, highlight it and select Edit Name. Choose a new name from the list, and press OK.

To change the line-in level for this component, highlight it and select Edit Line Level. Choose the line-in level appropriate for this device, and click OK.

A default (typical) line-in level is automatically assigned when you select a source name. If the volume sounds too low, you can select a higher line level for this device. You may experience clipping at higher volume levels if you set the level too high.

To change the line-in encoding for these components, see "Line-In encoding" on page 7-16.

Page 35
Image 35
Sonos Digital Music System manual To connect using Sonos Controller