Sonos Digital Music System manual

2-12 Chapter 2: System Setup

if desired.

A Sonos ZoneBridge will not display in your Zones menu after it is set up. If you wish to change the settings for this device, you can choose one of the following options:

•Using the Desktop Controller software, select Zones>ZoneBridge Settings. Highlight the ZoneBridge, and then click Settings.

•Using the SonosController, select System Settings>ZoneBridge Settings from the Music menu.

Add a ZonePlayer

If your house has structured (built-in) wiring, you can make a ‘wired’ connection to the new Sonos component. Otherwise, you can connect wirelessly.

Caution: Do not place any items on top of your ZonePlayer. This may impede the air flow and cause your ZonePlayer to overheat.

1.Place the ZonePlayer in the room you have selected.

2.If you are making a wired connection, connect a standard Ethernet cable from either your router, another ZonePlayer, or a ‘live’ network wall plate to any of the Ethernet switch connections on the back of the new ZonePlayer. If you are making a wireless connection skip this step and proceed to step 3.

3.Choose one of the following options:

•If you are adding an amplified ZonePlayer, attach desired speakers (see "If you are connecting a ZonePlayer 100" on page 2-6).

•If you are adding a ZonePlayer 80, connect an external amplifier (see "If you are connecting a ZonePlayer 80" on page 2-6).

4.Choose one of the following options:

•Using the Desktop Controller software, select Add a ZonePlayer or ZoneBridge from the Zones menu.