Chapter 2: System Setup

2-7

The Mute button indicator and the ZonePlayer Status indicator will begin to flash. (If this ZonePlayer was previously connected to another Sonos Digital Music System, the ZonePlayer Status indicator may light solid white instead.)

2.Connect your ZonePlayer 80 to an external amplifier by choosing one of the following options:

Connect to a home theater or amplifier

If you have digital inputs on your home theater or amplifier, you can use either a TOSLINK optical audio cable or a digital coaxial cable to connect the ZonePlayer 80’s digital output to the digital input on the receiver.

If you have analog inputs on your home theater or amplifier, use a standard RCA audio cable to connect a ZonePlayer’s analog audio output to the audio inputs on the receiver.

Select the proper input channel on the receiver.

After you finish setting up your Sonos system, go to "Using Line-out" on page 2- 17 to adjust the volume settings.

Connect to a computer or powered speakers

You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch stereo miniplug to dual RCA male connectors) to connect the ZonePlayer’s analog au- dio output to the computer’s audio input.

You may need a Y-adapter audio cable (one1/8-inch stereo miniplug to dual RCA male connectors) to connect the speakers to the audio outputs on the ZonePlayer. If your speakers have a male 1/8-inch stereo plug, you will need to attach a female-to-female coupler between the speaker plug and the Y-adapter audio cable.

Page 21
Image 21
Sonos Digital Music System manual Connect to a home theater or amplifier, Connect to a computer or powered speakers