Sonos Digital Music System manual ZonePlayer or ZoneBridge not detected during setup

A-2 Sonos Digital Music System User Guide

Using your Desktop Controller:

1.From the Music menu, select Set Up Music Library.

2.Select the music folder(s) stored on this computer, and click Remove.

3.Next, re-add the share by selecting Add a Share.

4.Select Add music stored on this computer and click Next.

5.Select the music folder you just removed, and click Next.

6.Click Finish.

ZonePlayer or ZoneBridge not detected during setup

Which CD-ROM did you use to install the ZoneBridge? If you did not use the CD-ROM packaged with your ZoneBridge, insert that CD-ROM and follow the prompts to set up your ZoneBridge.

A network problem may be preventing the ZonePlayer from associating with the Desktop Controller software. If this is a wireless ZonePlayer, try moving the ZonePlayers closer together, or wire the ZonePlayer temporarily to see if the problem is related to wireless interference.

If you encounter this message on the first wired ZonePlayer, you can try the steps below to resolve this issue:

1. Check Firewall

Firewall software installed on the computer may be blocking the ports that Sonos uses to operate. The first step is to disable all your firewalls and try to connect again. If this resolves the problem, then configure your firewall to work with the Sonos music system. Click "Firewall Information" on page 6-9 for help with this step. If this does not resolve the problem, go on to step 2.