U SING YOUR DISHWASHER
USING YOUR DISHWASHER
Height Adjustable Upper Rack for 14 in. lower rack capacity
The upper rack adjusts up and down to let you put tall and oversized items on it. The racks can be adjusted to allow 14 inch plates on the bottom rack or the upper rack will allow 12 inch dishes.
To raise the rack
Raise the upper rack by lifting the rack at the
middle of each side ( 
marked position) until the rack locks in place.
To lower the rack
Hold the rack in the middle of each side to support the weight of the rack, then lift the lever on each side to release the rack and lower it.
( 
marked position).
NOTE
After adjusting, check that the spray arm is free to rotate without being stopped by dishes loaded on the upper or lower racks. Do not adjust the rack when it is loaded with dishes.
Caution
Non Dishwasher-Safe Items
The combination of high water temperature and dishwasher detergents may damage certain items. Therefore we do not recommend using the dishwasher to wash the following items: �Hand painted silver or gold leaf crockery �Wood or bone handled utensils
�Iron or
�Plastic items which are not dishwasher safe.
Half Loading Option
In the event that you do not have enough dishes for a full load, you can simply load dishes in the upper rack or in the lower rack only. You can then wash either rack separately by selecting the half load option. This will bring about a savings in hot water, electricity and time.
Removing the Upper Rack
The upper rack can be removed to make more room in the lower rack.
To remove the upper rack
1.Pull the upper rack out until it stops.
2.Squeeze the tab of the retainer at the end of each side rail and remove it.
Be careful not to allow the upper rack to fall off the rails while removing the retainers.
3.Pull the upper rack out of the slides.
Squeeze Tab
NOTE
Always remove dishes from the upper rack before removing the rack.
12
